Dake Model LE10A - Manual (Page 20)

12/10/07 Model LE10A Text 20
BLADE BREAK IN OPERATION
When a new saw blade is used, be sure to first break in the blade before using it for
actual extended operation. Failure to break in the blade will shorten the life of the
blade and result in less than optimum efficiency. To break in the blade, proceed as
follows:
1. Lengthen the time required for cutting 2-3 times that of normal.
2. The break-in operation can be considered sufficient if all unusual noises
or metallic sounds have been eliminated. (For instance, to completely
break in the blade, a minimum of five complete cuts of a 200mm (7.9 in)
diameter work piece will be required.)
3. After the break-in operation has been completed, return the blades speed
and descending speed to their normal settings