Dake Model LE10A User Manual
Page 5
12/10/07 Model LE10A Text
5
SECTION 1
1.1 General Safety Instruction
Read and understand the instruction manual and warning signs before operating this
machine. Failure to follow these instructions and warnings can result in serious injury or
death.
1. Always wear eye protection.
2. Do not wear gloves, neckties, loose clothing or jewelry while operating machine.
3. Keep fingers out of path of the blade.
4. Do not remove jammed or cut-off pieces until blade had completely stopped.
5. Check blade tension and adjust blade guide before starting.
6. Always clamp stock firmly in place before cutting and use auxiliary support for long
material.
7. Disconnect machine power from source before making repairs or adjustments.
8. Guards should be in place and used at all times.
9. Keep machine and chip collections system clean.
10. Never operate the machine when guarding is removed.
11. Do not touch the blade or place any body part into the vice area when machine is in
operation.