Avaya S8300 - Manual (Page 449)

About the Installation Roadmap and Task Lists
Issue 9.1 June 2006 449
Checklist 2:
Install a new G700 without an S8300
Use Checklist 2 to install a G700 Media Gateway with the following characteristics:
● The G700 does not have an S8300 and is controlled by an external S8300, S8400, S8500,
or S8700-series Media Server.
You will use Chapters 2 and 10 with this checklist.
For help with connecting to and logging in to the G700, see About connection methods on
page 63.
If using IA770, administer
Communication Manager for
Integrated Messaging
on
page 542
Complete the Installation
Process (for an S8300 LSP)
on
page 543
- Check planning documentation
- Connect and administer test endpoints
- Complete electrical installation
- Enable adjunct systems
Checklist 1: Manually install new G700 with an S8300 (Primary or LSP) (continued)
Major Tasks Subtasks
3 of 3
Checklist 2: Manually install a new G700 without an S8300
Major Task Subtasks
Before going to the customer
site
on page 547
- Get planning forms
- Get the G700 serial number
-- Set up TFTP server, if necessary
- Download firmware files
Hardware installation for the
G700 Media Gateway and
S8300 Media Server
on
page 83
- On site checklist
- Unpack and check the order
- Install the G700
- Cable multiple units
- Attach ground conductors
1 of 2