Avaya S8300 - Manual (Page 704)

Manual upgrade of an existing S8300B and G700 to R3.1
704 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Determining which firmware to install on the G700
Conduct the following procedure to compare software versions running on the G700 processors
and media modules with the versions in you planning documents. If the versions do not match,
you need to install the new firmware for those components.
To determine if new firmware for the P330 stack processor is necessary
1. Access the stack processor. See one of the following:
● Logging in to the P330 Stack Processor with a Direct Connection to the S8300 Services
Port
on page 76
● Logging in to the P330 Stack Processor with a LAN Connection on page 77
● Logging in to the P330 Stack Processor with a Direct Serial Connection on page 78
● Logging in to the P330 Stack Processor with Device Manager on page 78
2. At either the P330-1(super)# or P330-1(configure)# prompt, type dir.
The system displays the directory list of software for the P330 stack processor.
Directory list for P300 stack processor
3. Check the version number (ver num) of the EW_Archive file to see if it matches the Release
Letter.
If not, you must upgrade the P330 stack processor.
4. Type show image version
The system displays the list of software.
Show image version List for P330 stack processor
M# file ver num file type file location file description
-- ---- ------- ---------- ------------- ----------------
1 module-config N/A Running Conf Ram Module
Configuration
1 stack-config N/A Running Conf Ram Stack Configuration
1 EW_Archive 4.0.4 SW Web Image NV-Ram WEB Download
1 Booter_Image 3.2.5 SW BootImage NV-Ram Booter Image
Mod Module-Type Bank Version
------ ----------- ---- -------
3 Avaya G700 media gateway A 0.0.0
3 Avaya G700 media gateway B 4.0.17