Avaya S8300 - Manual (Page 447)

About the Installation Roadmap and Task Lists
Issue 9.1 June 2006 447
For help with connecting to and logging in to the G700 or S8300, see About connection
methods on page 63.
Checklist 1: Manually install new G700 with an S8300 (Primary or LSP)
Major Tasks Subtasks
Installation Overview on
page 458
- G700 components
- Software and firmware files
- Access to the Server CD
- Access to the S8300 and G700
Before Going to the Customer
Site
on page 461
- Install TFTP Server or Obtain USB CD Drive
- Get planning forms
- Get the G700 serial number
- Check FTP server for backups
- Obtain service pack files, if needed
- If using IA770, obtain service pack and
language files, if needed
- If using IA770, obtain Ethernet interface IP
address and Subnet mask
- Complete the RFA process
- Obtain static craft password
Hardware installation for the
G700 Media Gateway and
S8300 Media Server
on page 83
- On site checklist
- Unpack and check the order
- Install the G700
- Cable multiple units
- Attach ground conductors
Install the S8300 on page 468 - Insert the S8300
- Remaster the hard drive and install new
software
- Download service pack and security files
- Verify time, date, and time zone
- Install license and authentication files
- Save translations
- Install Communication Manager service pack,
if any
- Install IA770 service pack, if any
Configuring the S8300 on
page 481
- Backup data
- Set server identities
- Configure Ethernet interfaces
- Configure LSP
- Configure Ethernet adjuncts
- Configure External DNS server
- Set Static network routes, if necessary
- Configure network time server
- Set modem interface
- Update system
- Load Key files, if necessary
1 of 3