Videoswitch VK-2 - Manual (Page 76)

VK-2 Universal Keyboard
VK-2 Universal Keyboard User Manual
73
To finish programming a tour:
• The tour can be finished when the letters “PoS” are displayed, as follows:
• Holding
the
ALT key on, press the PROG key (i.e. without entering another position) to finish the
tour programming.
• The word “Fin” will be displayed, indicating that the tour programming has finished.
• Finally, Holding the ALT key on, press the PROG key to return the display to its normal mode.
Tours can also be programmed via the in-built dome menu (Press
FUNCTION then SETUP to access the
menu).
19.7 Menus
The VK-2 has a special mode to make access to dome menus very easy:
• Press
the
FUNCTION key on the VK-2.
• The letters “Fn” will appear on the display.
While the “
Fn” is being displayed, some of the keys on the VK-2 have special functions as follows:
• Press
the
SETUP key to enter the dome user menu.
• Use
the
Up, Down, Left, Right arrow keys to navigate within the dome menu.
• Press
the
YES key to enter a sub-menu or to accept a menu setting.