Videoswitch VK-2 - Manual (Page 61)

VK-2 Universal Keyboard
VK-2 Universal Keyboard User Manual
58
• The display will show the letter “t—”.
• Press one of the number keys 1, 2, 3…16 to run a tour (see table below).
• Group 1 contains presets 1, 2, 3 & 4.
• Group 2 contains presets 5, 6, 7 & 8.
• Group 3 contains presets 9, 10, 11 & 12.
• Group 4 contains presets 13, 14, 15 & 16.
Key press Tour Groups Key press Tour Groups
1 Group 1 only 9 Groups 2 + 3
2 Group 2 only 10 Groups 2 + 4
3 Group 3 only 11 Groups 3 + 4
4 Group 4 only 12 Groups 1 + 2 + 3
5 Groups 1 + 2 + 3 + 4 13 Groups 1 + 2 + 3 + 4
6 Groups 1 + 2 14 Groups 1 + 2 + 4
7 Groups 1 + 3 15 Groups 1 + 3 + 4
8 Groups 1 + 4 16 Groups 2 + 3 + 4
• The dome will run the tour until the TOUR key is pressed again.
14.9 Menus (PIH-7625 series only)
The VK-2 has a special mode to make access to dome menus very easy:
• Press
the
FUNCTION key on the VK-2.
• The letters “Fn” will appear on the display.
While the “
Fn” is being displayed, some of the keys on the VK-2 have special functions as follows:
• Press
the
SETUP key to enter the dome user menu.
• Use
the
Up, Down, Left, Right arrow keys to navigate within the dome menu.
• Press
the
YES key to enter a sub-menu or to accept a menu setting.
14.10 Other Commands
180
° turn
• Press and hold ALT then press the F1 key