Videoswitch VK-2 - Manual (Page 71)

VK-2 Universal Keyboard
VK-2 Universal Keyboard User Manual
68
17.6 Presets
17.6.1 Recalling a Preset
• Press
the
PRESET key.
• The display will show the letter “P—”.
• Press one of the number keys 1, 2, 3…16 to select a preset that has previously been stored.
• The dome will move to that preset position.
• If the joystick is moved, the preset display will be cancelled.
17.6.2 Setting a Preset
• Move the dome to the position at which you wish to set a preset.
• Press and hold the ALT key and then press the STORE key.
• The display will show the letter “P—”, flashing.
• Press one of the number keys 1, 2, 3…16 to select a preset.
• Press and hold the ALT key and then press the STORE key to store the preset.
17.6.3 Clearing a Preset
• Press and hold the ALT key and then press the STORE key.
• The display will show the letter “P—”, flashing.
• Press one of the number keys 1, 2, 3…16 to select a preset.
• Press and hold the ALT key and then press the WIPE key to clear the preset.
17.7 Tours
17.7.1 Running a Tour
• Press
the
TOUR key.
• The display will show the letter “t—”.
• Press one of the number keys 1, 2, 3 or 4 to select a tour number.
• The dome will run the tour until the TOUR key is pressed again.
17.7.2 Programming a Tour (Pattern)
To start the tour programming:
• Holding
the
ALT key on, press the PROG key.
• The display will show the letter “t—”, flashing.
• Press one of the number keys 1, 2, 3 or 4 to select a tour number.
• Holding
the
ALT key on, press the PROG key.
• The display shows flashing “rEC”.
• All joystick movements will be recorded until the programming is finished.