Videoswitch VK-2 - Manual (Page 68)

VK-2 Universal Keyboard
VK-2 Universal Keyboard User Manual
65
• Move the dome to the position at which you wish to set a preset.
• Press and hold the ALT key and then press the STORE key.
• The display will show the letter “P—”, flashing.
• Press one of the number keys 1, 2, 3…16 to select a preset.
• Press and hold the ALT key and then press the STORE key to store the preset.
Presets can also be programmed via the in-built dome menu (Press
FUNCTION then SETUP to
access the menu).
16.7 Tours
16.7.1 Running a Tour
• Press
the
TOUR key.
• The display will show the letter “t—”.
• Press one of the number keys 1, 2 or 3 (or 4 for a tour of all presets) to run a tour that has
previously been stored.
• The dome will run the tour until the TOUR key is pressed again.
16.7.2 Programming a Tour
Samsung domes use “patterns” that are programmed using the dome’s built-in menu (see below).
16.8 Menus
The VK-2 has a special mode to make access to dome menus very easy:
• Press
the
FUNCTION key on the VK-2.
• The letters “Fn” will appear on the display.
While the “
Fn” is being displayed, some of the keys on the VK-2 have special functions as follows:
• Press
the
SETUP key to enter the dome user menu.
• Use
the
Up, Down, Left, Right arrow keys to navigate within the dome menu.
• Press
the
YES key to enter a sub-menu or to accept a menu setting.
16.9 Other Commands
Auto-Pan
• Press AUTO-PAN key.