Videoswitch Vi-R4000 Series - Manual (Page 53)

Vi-R4000 Series
Videoswitch Page 47 Mdr602a.doc
• Look at Camera, Record, Alarm, Network and HDD tabs and check for errors
• Select
Log Information
Click on Search (change date and Major Type and Minor Type to narrow down the events as
required)
4.1.6.1 Yellow Triangle
The yellow triangle is an alert cause by either:
• An alarm such as movement detection or external alarm input
• An exception such as a hard drive failure.
4.1.6.2 Red Cross
A red cross indicates that recording has stopped on that camera. This may be due to a variety of
reasons, including:
• Time is outside programmed schedule
• Recording has been manually stopped
• Camera is faulty
• Hard drive is faulty
• Network problem (if IP camera)
4.1.7 Quick setting Toolbar
If you right-click on the mouse (or mouse emulator) in Live mode, you will see this toolbar.
This provides these functions (in order):
Enable manual record If schedule is inactive, record may be manually enabled or disabled
Instant playback Instant Playback only shows the last five minutes recorded
Mute audio Mute/Enable audio
Capture an image Take a snapshot of the current image
PTZ control Control dome via keyboard
Digital Zoom Left-click and draw to select the area for zooming
Image settings Adjust image appearance
Close toolbar Close this toolbar