Videoswitch Vi-R4000 Series - Manual (Page 41)

Vi-R4000 Series
Videoswitch Page 35 Mdr602a.doc
3.5.3.1 Manually Set DVR Address
If the DVR is being cascaded with Vi405 DVRs, you will need to manually set its address. Set the
address as follows:
Press and hold LIVE key, enter 13xx, release LIVE key
Where XX is the unit number 01 to 16.
3.5.3.2 Manually Set Address Range
If you are not using network cameras, you may wish to set the address range to 1. Set the address
range as follows:
Press and hold LIVE key, enter 14xx, release LIVE key
Where XX is the unit address range 01 or 02.
3.5.4 Sharing a VGA Monitor
If you wish to share a VGA monitor, you will need to set the monitor output on each unit to VGA as
they will not all be able to automatically detect the monitor on power-up.
To set the main monitor to VGA on each unit, navigate to this menu option:
Menu>configuration>General>More Settings->Menu Output Mode set to: VGA