Videoswitch Vi-R4000 Series - Manual (Page 19)

Vi-R4000 Series
Videoswitch Page 13 Mdr602a.doc
3.1 Password Access
If password protection is enabled, a password will need to be selected to gain access to protected
functions such as the menu. When the password box appears, enter the password using one of these
methods:
3.1.1 Keyboard Mode
• If you want to select a different User Name press arrow keys to highlight User Name field,
press OK, press down arrow, press OK again.
• Press arrow keys to select Password field
• Press
EDIT key to enter edit mode
• Enter the password using 0-9 keys
• Press
OK
• Press arrow keys to select OK on screen
• Press
OK
3.1.2 Mouse
• Click on user name if you wish to change it and select another use
• Click on password field, enter password numbers and click on ENTER.
• Click on OK
3.1.3 Mouse Emulator Mode
This is the same as using a mouse, except the up, down, left, right keys are used to move the mouse
pointer and the OK keys act s as a left mouse click.
• Click on user name if you wish to change it and select another use
• Click on password field, enter password numbers and press OK while on ENTER.
• Click on OK
3.1.4 Default Passwords
The Vi-R4000 series DVR is shipped with default users and passwords pre-configured as shown in
this table. Access rights may be changed and other users may be added when logged in as admin. All
default settings may be restored by importing the default configuration from a USB memory stick. If
you change the admin password take care that it is not forgotten.
Username Default Password Access Rights
admin 12345 Access to everything for system configuration
user1 111111 Full local and remote access and configuration
user2 222222 Local and remote viewing, playback and export.
user3 333333 Local viewing, playback and export
user4 444444 Local manual operation of cameras