Videoswitch Vi-R4000 Series - Manual (Page 11)

Vi-R4000 Series
Videoswitch Page 5 Mdr602a.doc
1.2.2 Mouse Control
The DVR can be fully controlled by a mouse and this is recommended especially for ease of system
configuration.
• Move mouse to move pointer around screen
• Right click to bring up menu
• Left click to select items pointed to by the on-screen mouse pointer
Note: The mouse would normally plug into the USB MOUSE port on the rear of the DVR. If you enable
the mouse emulator (i.e. use keys top simulate mouse), the mouse will be disabled.
1.2.3 Mouse Emulator Control
The mouse emulator provides all the control of a mouse but using the front panel keys. The mouse
emulator function may also be used via a remote keyboard,
• Press
Left , Right, Up Down keys to move pointer around screen
• Press
TAG key to bring up menu when in live mode.
• Press
OK key to select items pointed to by the on-screen mouse pointer.
To enable/disable the mouse emulator, press ESC key and at same time, press the TAG key.
1.2.4 External Keyboards
The external keyboard ports support Vi-K1 and Vi-K2 series keyboards and allow remote control of the
DVR. The DVR sends video over CAT5 to the BNC output connectors on each keyboard for
connection to a monitor. When DVRs are cascaded, the keyboard monitor outputs can display images
from any of the DVRs.