beautypg.com

Care of your product, Precautions, Specifications – CDN DTC1-G - Air Thermometer & Clock EN User Manual

Page 2

background image

2.

Sensor
a. Run cable under, or behind, door or window.

Make sure cable is not cut when door or

window is closed.

Note:

When mounting the sensor outside of a vehicle,

tape or wire it in place away from the air stream,

exhaust pipes or manifold to prevent a reading error.

b. Remove paper backing from sensor and

adhere to a clean, dry, smooth surface.

Care of Your Product

Avoid exposing your thermometer to extreme

temperatures, water or severe shock.

Avoid contact with any corrosive materials such as

perfume, alcohol or cleaning agents.

Wipe clean with a damp cloth.

Precautions

Keep the battery and sensor away from children.

Do not clean the case with abrasive or corrosive

compound, which may scratch the plastic and

corrode the electronic circuits.

Do not subject the unit to excessive force shock,

dust, temperature or humidity, which may result in

malfunction, shorter electronic life span, damaged

battery and distorted parts.

Do not tamper with the unit’s internal components.

Doing so will invalidate the warranty on the unit

and may cause unnecessary battery damage and

distorted parts.

Do not subject the case to excessive exposure to

direct sunlight. The case is not waterproof — do not

immerse it into water or expose to heavy rain.

To avoid deformation, do not place the case in

extreme temperatures.

Always read the users manual thoroughly before

operating.

Specifications

Temperature Range: -58 to +158°F/-50 to +70°C;

°F/°C selectable

Accuracy:

± 1.8 °F/± 1°C

Power:

1 DC 1.5V LR44 battery

Clock:

12 hours AM/PM

© 2006 Component Design Northwest, Inc.

Made in China

CD9999164en - 11/06

EHC 614 885-2497

��������� ������ ���������� ����
�� ��� �����

��������� �� ����������
��� ��� ��������

��� ��� ��������
��� �����������������������

The information in this document has been reviewed and is

believed to be accurate. However, neither the manufacturer nor

its affiliates assume any responsibility for inaccuracies, errors

or omissions that may be contained herein. In no event will

the manufacturer or its affiliates be liable for direct, indirect,

special, incidental or consequential damages arisen by using

this product or resulting from any defect/omission in this

document, even if advised of the possibility of such damages.

The manufacturer and its affiliates reserve the right to

make improvements or changes to this document and the

products and services described at any time, without notice

or obligation.

5-Year Limited Warranty: Any instrument that

proves to be defective in material or workmanship

within five years of original purchase will be

repaired or replaced without charge upon receipt of

the unit prepaid at: CDN, PO Box 10947, Portland,

OR 97296-0947. This warranty does not cover

damage in shipment or failure caused by tampering,

obvious carelessness or abuse.

*USDA does not endorse any product, service or organization.