ARI Armaturen ARImetec-S EN - Manual (Page 7)

Rev. 0040807015 1014 Page 2-7
Operating Instructions
ARImetec
®
-S
5.0 Handling
5.1 General information
The ARImetec
®
-S and all sensors and accessories are ruggedly designed. Nevertheless,
they must be protected against mechanical damage and heavy impact loads.
The ARImetec
®
-S corresponds to the state of the art and all relevant safety regulations.
The manufacturer has done everything possible to guarantee safe working. The user must
take appropriate steps to ensure that safe use is not impaired.
- The ARImetec
®
-S is only allowed to be used with or connected to the supplied
accessories, namely the headphones, the structure-borne sound sensor and the surface
temperature sensor.
- The device is only allowed to be operated by suitably trained persons. All users must read
these Operating Instructions carefully prior to working with the device.
- The ARImetec
®
-S must be protected against moisture in order to prevent damage.
- The ARImetec
®
-S and the connected sensors are suitable for use in the temperature
range from 0 to +50°C.
- The structure-borne sound sensor must always be used and handled with appropriate
care to prevent injury to persons from the sensor tip. Use the sensor holder provided on
the shoulder strap of the leather bag if you need to carry the sensor around with you or
whenever it is not in use.
- In the interests of accident prevention, you should also use the leather bag and shoulder
strap to climb stairs or ladders, mount platforms, etc.
- Avoid using the ARImetec
®
-S in strong electromagnetic fields.
- ARI-Armaturen GmbH & Co. KG accepts no liability for damages caused to third parties
by the improper use of the device. All warranty claims will be refused.
ATTENTION !
- If ultrasonic signals are detected on electrical installations, always maintain a
sufficient safe distance to avoid electrical flash-overs.
- Never work with the sensors or the telescopic rod in the vicinity of non-insulated
live parts or without eye contact in areas with which you are not familiar.
- Particular caution is required when using the sensor holder because the
clamping spring force can lead to injuries if your hands become trapped.
ATTENTION !
- The ARImetec
®
-S and all accessories must not be opened (except battery
compartment) or otherwise tampered with for the purpose of carrying out
unauthorised repairs. The device must always be sent in to the manufacturer
for repair.