ARI Armaturen ARImetec-S EN - Manual (Page 11)

Rev. 0040807015 1014 Page 2-11
Operating Instructions
ARImetec
®
-S
6.3 Switching on the device
If no sensor is connected to the device, you see the words "No sensor" instead of the
ultrasonic level.
6.4 Battery charge symbol
The symbol in the top right of the display ("1" in the picture above) indicates the current
battery charge as well as the power supply mode:
- You switch on the device by pressing the "ON/
OFF" button. After displaying the welcome
screen, the automatically launches check
mode. The display shows the following:
1: Battery or USB mode, battery charge symbol
2: Temperature
3: Check mode / mixer frequency
4: Sensor type
5: Tester
6: Functions currently active for buttons F1-F3
7: Intensity scale for ultrasonic level
8: Ultrasonic level
9: Date / time
Battery mode (approx. 60%) USB mode
"ON/OFF" button