ARI Armaturen ARImetec-S EN - Manual (Page 17)

Rev. 0040807015 1014 Page 2-17
Operating Instructions
ARImetec
®
-S
6.7.2.3 Stopping the long-time test
6.7.2.4 Information about the selected long-time test
By pressing the control knob in the long-time test overview, you can display information
about the tester, test point, date and time, test time and test interval. You also have the
option of deleting the test or of showing the test values in the form of a graph.
Ultrasonic levels are represented on the graph by a solid line and temperature values by a
dotted line. The maximum visible time window is 60 s. If the test time is longer than 60 s,
you can shift the time window by turning the control knob. The ultrasonic level is displayed
on a logarithmic scale graduated from 0 to 140 or on a linear scale graduated from 0 to 240.
The temperature is displayed on a scale from 0 to 800°C or from 0 to 1472°F.
To stop recording values for the long-time test and
return to check mode, you must select "Stop long-
time test" in the Setup menu.
All test values recorded so far are stored and the
test is added to the overview of long-time tests
stored in the device.