Red Lion ARCJ - C-FACE ADAPTER KIT - Manual (Page 2)

MAGNETIC PICKUP SENSOR
The ARCJ kits with this sensor option use the Red Lion Controls MP-37CA
Magnetic Pickup.This sensor does not require external power.
The Magnetic Pickup is factory installed in the ring to provide a nominal
sensor/gear air gap of 0.007" (0.18 mm) to 0.010" (0.25 mm). This provides
adequate output from the sensor for most applications. However, if output must
be maximized, the air gap can be easily user-adjusted to 0.005" (0.13 mm)
minimum, once the particular gear being used is mounted on the motor shaft.
(Refer to Magnetic Pickup literature for more details, enclosed in ARCJ kits.)
HALL EFFECT SPEED SENSOR (HESS)
The ARCJ kits with the HESS sensor requires an external +8 to +30 VDC
power source. This sensor does NOT have a minimum threshold speed as does
a magnetic pickup sensor. However, when the sensor is first powered up, the
output state is indeterminate when the sensor is not detecting metal. The sensor
face can be mounted flush into metal panels. The case is stainless steel and is
supplied with 10 feet (3 M) of cable. The stranded shield wire is not connected
to the sensor circuit or the case.
The sensor to gear air gap is factory set to a nominal gap of 0.015" (0.38
mm). The air gap can be adjusted by the user from 0.005" (0.13 mm) to 0.040"
(1.02 mm), which allows 0.005" (0.13 mm) maximum total gear runout.
SPECIFICATIONS (HESS Sensor)
1. POWER SUPPLY: +8 to +30 VDC @ 30 mA max; Reverse Polarity
Protected.
2. MAXIMUM SENSING DISTANCE: 0.040" (1 mm).
3. OUTPUT: NPN O.C. transistor; V
SAT
= 1 V max @ 30 mA max. load.
4. OPERATING TEMPERATURE RANGE: -25°C to 70°C
(-14°F to 158°F)
5. CABLE LENGTH: 10 feet (3.05 M)
6. OPERATING FREQUENCY: 0 to 10 KHz
7. WIRE COLOR CODE: 3-wire, 22 AWG with stranded drain wire and
100% foil coverage; grey PVC jacket.
8. CABLE STRAIN RELIEF: 10 lbs (4.5 Kg) for 1 minute.
Note: Do NOT adjust sensor air gap while target (gear) is moving.
ORDERING INFORMATION
+VDC (RED)
O.C. OUTPUT (WHITE)
COMMON (BLACK)
SHIELD WIRE
N/C
+12VDC
COUNT
COMMON
HESS
LO FRQ. SRC. MAG
.
HI
SNK.
LOGIC
*
TYPICAL COUNTER
DIP SWITCH SET-UP
* APPLICATION
DEPENDENT
.373
-.005
+.000
(9.47 )
-.13
+.00
2.5 ±.03
(63.5 ±.8)
10ft.
(3.05M)
2
(50.8)
.25
(6.4)
SHIELD WIRE
ALL WIRE
ENDS TINNED
GREY PVC
JACKET
STAINLESS
STEEL CASE
HESS DIMENSIONS In Inches (mm)
MOTOR FRAME SIZE
MAG. PICKUP HESS
56C 5/8" ARCJ-1 0960625
X ARCJ1A00
X ARCJ1AZ0
7/8" ARCJ-1 0960875
X ARCJ1B00
X ARCJ1BZ0
182TC, 184TC, 213C, 215C, 254C 1 1/8" ARCJ-2 0941125
X ARCJ2A00
X ARCJ2AZ0
213TC, 215TC, 254UC, 256UC 1 3/8" ARCJ-2 0941375
X ARCJ2B00
X ARCJ2BZ0
254TC, 256TC 1 5/8" ARCJ-2 0941625
X ARCJ2C00
X ARCJ2CZ0
COMPLETE KIT
PART NO.
SENSOR RING
MODEL NO.
SHAFT DIA.
(Gear Bore)
GEAR P/N
(Ref.)
143TC, 145TC, 182C, 184C
MODEL NO. DESCRIPTION PART NUMBER
HESS Replacement Sensor for HESS Option HESS0000
MP-37CA Replacement Sensor for Magnetic Pickup Option MP37CA00
Do not dispose of unit in trash - Recycle