Vaisala GM70 - Manual (Page 42)

USER'S GUIDE ______________________________________________________
42 _____________________________________________________ M010139EN-G
Transferring Recorded Data to PC
The recorded data can be transferred to a PC by using the MI70 Link
program.
The MI70 Link program can be ordered from Vaisala, see section
Accessories on page 65. You can examine the recorded data easily in
Microsoft Windows® environment and further transfer it into a
spreadsheet program (such as Microsoft Excel® for modifications.
Together with the USB instrument cable (optional accessory 219687) or
the serial connection cable it is easy to transfer logged and real time
measurement data from the GM70 to a PC.
When using the USB cable consider the following: the MI70 Link
program contains the driver needed for the USB connection. For the
system requirements and installation, see the back of the installation CD.
Follow the installation instructions on the CD. Check that the USB cable
is not connected. The MI70 Link Setup Wizard will install Vaisala MI70
Link on your computer. Installing the USB instrument driver can take a
few minutes. After the installation is finished, connect the USB cable to
the USB port on your PC. Windows will detect the new device, and use
the driver automatically.
You can now start monitoring the GM70 readings in real time with a PC
using the MI70 Link program. In case the MI70 Link cannot find the
instrument, check the following:
- the GM70 is switched on
- the USB instrument cable/serial connection cable is properly connected
to the USB/serial port of your PC
- another application has not reserved the connection