Setting actual temperature value and unit – Vaisala GM70 User Manual
Page 28
USER'S GUIDE ______________________________________________________
28
_____________________________________________________ M010139EN-G
Setting Actual Temperature Value and Unit
For achieving the most accurate measurements, the actual temperature
value should be set to the GM70. The acceptable temperature range is -
20...60ºC.
Follow the instructions below:
1. Open
the
MENU
, press
OPEN.
2. Select
►Environment
with
press
.
3.
Select temperature value, press
SET
.
4.
Set the temperature value by using
buttons. Press
OK
to
save the value.
5. Press
UNIT
to change the temperature unit. Default unit is ºC.
6. Press
EXIT
to return to the basic display.
If you are using the HMP75 or other humidity probe, the temperature
information can be linked to compensate the GM70's CO
2
reading. For
more information on simultaneous measurements, see section Measuring
Other Parameters Simultaneously on page 22.