Vaisala PTB330 - Manual (Page 56)

USER'S GUIDE____________________________________________________________________
54 __________________________________________________________________ M210855EN-D
Display Settings
Changing Quantities
1. Open the MAIN MENU by pressing any of the arrow buttons.
2. Select Display and press the right arrow button.
3. Select Quantities and press the right arrow button.
4. Select a quantity by using the up/down arrow buttons. Confirm
your choice by pressing the SELECT button. You can select 1
... 4 display quantities at a time. Undo selection by selecting it
and pressing the HIDE button.
5. Press EXIT to return to the basic display.
See Table 2 on page 15 for available quantities.
NOTE Only the quantities selected for the display are stored in the graphical
history. If a quantity is hidden, it is not stored in the memory of the
barometer for the time being.
NOTE In order to output P
3h
or A
3h
readings through the serial line, either P
or P
3h
must be selected for display.
Changing Units
1. Open the MAIN MENU by pressing any of the arrow buttons.
2. Select Display and press the right arrow button.
3. Use the up/down arrow buttons to select Units. Press the right
arrow button.
4. Use the up/down arrow buttons to select display units. Confirm
the selection by pressing CHANGE.
5. Press EXIT to return to the basic display.
NOTE Changing the display quantities/units (by using the display/keypad)
has no effect on the serial output data.