Vaisala PTB330 User Manual

Page 41

Chapter 3 _______________________________________________________________ Installation

VAISALA _______________________________________________________________________ 39

If you are replacing an existing module, the installation is
complete. If you are adding a new module, continue to the next
step.

10. Connect to the service port, and execute the MODS command to

11. Switch the power off and back on again to clear related errors

and to activate the changes.

Figure 23

Analog Output Dip Switch Positions

NOTE

For instructions on how to operate the analog output, see section
Operating Analog Output on page 102.

NOTE

Only one of the switches 1 and 2 can be ON at a time. Only one of
the switches 3...7 can be ON at a time.