Vaisala HMT140 - Manual (Page 49)

Advanced Options
M211488EN-C 41
Passwords
To improve security, you can require that a user log in to
make changes to HMT140 parameters. If Passwords are
enabled, a password prompt appears when a user clicks
Update on the Setup tab. No other HMT140 functions will
require a login password.
To set, change or remove an HMT140 password:
1
Open the HMT140 Utility.
2 Connect the HMT140 to your computer.
3 From the Options menu, select Advanced Options.
4 On the Advanced Options window, check Enable use
of passwords in HMT140 , then click OK.
5 To set the password for the first time:
• Leave the Current Password field blank.
• Check the Change Password option.
• Enter the new password in the New Password and
New Password Again fields.
• Click Update.
6 To change an existing password:
• Enter the current password
• Check the Change Password option.
• Enter the new password in the New Password and
New Password Again fields.
• Click Update.
7 To clear a password:
• Enter the current password.
• Check the Change Password option, and leave the
New Password and New Password Again fields
blank.
• Click Update.
CAUTION:Record the password in a safe location for safe-
keeping; the HMT140 does not save the pass-
word. If the password is forgotten, contact Vais-
ala Technical Support.