Vaisala HMT140 - Manual (Page 39)

Custom Settings
M211488EN-C 31
12 Press the SERVICE button on the HMT140.
Optional : Enter a name for the saved settings on the
Set up tab in the Saved Settings field and click the
disk icon to save. If the HMT140 is used with more than
one wireless network, enter a name in the Saved Net-
work Settings field and click Save. Other network set-
tings files can be saved and recalled from the Saved
Settings field.
Modify HMT140 Description
If you want to make it easier to identify specific transmission
devices, enter custom names. By default, each device is
identified using the model name and channel type.
Note: Check with your network administrator before
making changes.
To modify your device and Channel descriptions:
1
Complete steps 1 to 6 in the procedure, Modify
Transmitter Settings, on page 28.
2 Select the Description tab and enter a device name, and/
or Channel descriptions. You can view these descriptions
in Vaisala viewLinc, and make changes in viewLinc if
required.
Check Transmission status
The Status page displays the current state of the IP settings,
connection status, signal strength, and battery life
parameters, as applied using the Update button on the
Network tab.
To monitor the transmission status:
1
On the Status tab, click Get to update the HMT140
Utility window with the latest status information: IP
settings, WLAN and Sensor battery. If successful, the
HMT140 Utility displays the information on the Status
page.