Custom settings, Modify transmitter settings – Vaisala HMT140 User Manual
Page 36
Custom Settings
28
VAISALA
the remote servers and, as a result, help to conserve battery
life.
Custom Settings
Use the HMT140 Utility to make additional changes to a
device’s network configuration settings.
Modify Transmitter Settings
To modify Transmitter settings:
1
Ensure the case is open and the correct batteries are
installed. (Vaisala part#: 236318SP).
2
Turn on the HMT140 and wait five seconds to ensure the
startup process completes.
3
Plug the USB connector on the HMT140 configuration
Cable to the computer, if it is not already connected.
4
From the Start menu, open the HMT140 Utility.
5
Connect the end of the HMT140 Configuration Cable
labelled USB Wi-Fi Programmer, to the 4-pin
HMT140 CONFIG header.
6
On the HMT140 Utility Setup tab, click Retrieve to
identify the device.
7
On the Sensor tab, select from the following options:
Transmit Period:
Select how frequently the HMT140
transmits data.
Tries
:
Select the number of transmission attempts per-
mitted for the specified Transmit Period.
Note:
An active alarm overrides a specified Transmit
Period.