Vaisala HMT140 User Manual

Page 37

Custom Settings

M211488EN-C

For example, if you select 15 minutes for the Transmit

Period, and 3 for the number of Tries, the device will

attempt to transmit every 15 minutes. If it cannot trans-

mit, it will make 3 transmission attempts, then will go

into ‘sleep’ mode until the next scheduled transmit

period.

Logging Period:

Specify how often the HMT140 will log

I/O into the log buffer.

Note:

When setting up a new HMT140, you can click
Retrieve

, to view current device settings.

Enable Beeper:

Select the option to enable or disable the

button control of the Beeper (whether you want to be

able to turn the Beeper on or off with the push button on

the device). It is also possible to turn the Beeper on and

off by holding down the SERVICE button for approxi-

mately five seconds.

Note:

The Beeper is enabled by default. There is no

external Beeper status indicator. It must be

enabled/disabled with the SERVICE button.