Vaisala HMT140 - Manual (Page 41)

HMT140 Function Modes
M211488EN-C 33
3 Read WLAN status:
Connection:
•
Failed: The HMT140 has failed to connect to a
wireless network.
• Associated - Not Connected: The HMT140 has
associated with the network but has not connected.
• Authenticated - Not Connected: Security settings
have been authenticated but has not connected.
• Assoc/Authen - Connected: The HMT140 has
associated and authenticated to the network and
connected successfully to the network.
Signal Strength: Signal strength of the last communica-
tions. The signal strength can vary from reading to read-
ing. Multiple samples should be taken to determine the
signal strength.
Channel: This is the channel found during the Channel
Auto Find feature or the channel set in the Setup page. If
the HMT140 cannot find a channel when in Auto Find
mode, the utility will display “none”.
4 Check HMT140 battery status:
Est. Life: Estimated percentage remaining of the battery.
Est. Expired: Estimated date when the battery should be
changed (dependant on the Transmit Period and the
number of alarms). For more information see, Viewing
Battery Life Remaining on page 37.
HMT140 Function Modes
Operating Modes
The HMT140 operates in two modes: Config mode and
Transmitter mode.
Config Mode
When the HMT140 is powered on, and the HMT140
Configuration Cable is connected to it, the HMT140 connects
to the network for about two seconds and then goes to sleep.