Vaisala HMT140 - Manual (Page 17)

Introduction to the HMT140
M211488EN-C 9
Humidity sensor HUMICAP180R
HMP110 Probe mounting flange 226061
HMP110 Probe mounting clamps, 10 pcs 226067
HMP110 Probe cable 3 m HMT140Z300
HMP110 Probe cable 5 mHMT140Z500
HMP110 Probe cable 10 m HMT140Z1000
Duct installation kit215619
Probe mounting flange226061
Boolean Switch Kit with Door Contact236319
Thermal Dampener Blocks236310SP
Replacement Batteries (Pack of 3)236318SP
External Power Supply 236081SP
HMP110 sensor protectioM211488EN-CM211488EN-Cn
Plastic grid filter DRW010522SP
Plastic grid with membrane filter DRW010525
Stainless steel sintered filter HM46670SP
*Separate order form required. Contact Vaisala sales at:
http://www.vaisala.com/en/contact/sales/Pages/
default.aspx
Fixed or Remote Probe
The HMT140 is available either with a fixed probe directly
attached to the transmitter housing or a remote probe with
different (3/5/10 m) cable lengths. Extension cables can be
easily cascaded in order to obtain longer reach, to a
maximum length of 10 m.
Interchangeable Probe
The HMP110 HUMICAP® relative humidity probe used in
the HMT140 transmitter is fully interchangeable. You can
easily remove the probe and replace it with a new one
without having to adjust the transmitter. You have the
following options when purchasing a new probe from
Vaisala:
• Order a new probe and keep your current one.
• Order a new probe and return the old one to Vaisala
(replacement probe).