Vaisala HMT140 - Manual (Page 44)

Battery Usage
36 VAISALA
Save and Recall Settings
Your setup parameters can be saved and associated with a
name on the Setup tab, in the Saved Settings field. These
setup parameters can then be recalled by that name, saving
you time reentering the settings.
The network parameters can also be saved separately and
associated with a name on the Network tab, in the Saved
Network Settings field. The network setup parameters can
then be recalled by that name.
Delete Saved Settings
Both the Saved Settings and the Saved Network Settings can
be deleted, to help keep the list of saved settings easier to
view and/or manage.

On the File menu, select Delete Sensor Setup or
Delete Network Setup , then choose the correct set-
tings name to delete.
Restart the HMT140
You may want to reboot your HMT140 to reconnect to the
network and re-acquire status information.

On the Status tab, click Restart.
Get General Information
To gather general information about the HMT140, select the
Info tab and then click Get. The HMT140 Utility will
retrieve the following information:
• MAC address
• Firmware version
• HMT140 serial number
• HMP110 serial number (if using)
Battery Usage
The HMT140 has a built-in battery meter. This meter is
based on a count of its transmissions. To determine battery