Duct installation kit – Vaisala HMT100 User Manual
Page 19
Chapter 3 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 19
Duct Installation Kit
The duct installation kit includes a plastic pipe with a flange (Vaisala
order code: 215619). To install the HMP100 probe with the duct
installation kit, drill a hole to the duct wall, assemble the probe to the
duct installation kit, slide the probe head through the hole, and attach the
flange to the duct wall with four screws. See pages 20 and 21 for details.
24
L
1
0505-176
Figure 6
Probe Installation with the Duct Installation Kit
The following explanations refer to Figure 6 above:
1 = Tension
screw
Distance L can be adjusted and locked in place with the tension screw.