Vaisala HMT100 - Manual (Page 18)

User's Guide ______________________________________________________________________
18 __________________________________________________________________ M210701EN-D
Installation with Radiation Shield
DTR502 with probe installation kit includes a rain/solar radiation shield
DTR502 and a plastic installation support for the humidity probe. Vaisala
order code: DTR502B. If you already have the DTR502 shield and need
only the installation support for the probe, it is available with Vaisala
order code 210623.
1. Fasten the probe to the installation support with two cable ties
(items 3 and 4 in Figure 5 below).
2. Insert and attach the support to the radiation shield by tightening
the plastic nut (item 2 in Figure 5).
3. Attach the entire radiation shield/probe assembly to a pole mast
(pole mast diameter: 30 ... 60 mm/1.2 ... 2.3") with the U-bolt and
support arm. See Figure 5.
1
2
3
4
5
6
0505-248
Figure 5 Installation of the Humidity Probe with the
Radiation Shield
The following numbers refer to Figure 5 above:
1 = DTR502
2 = Plastics
nut
3, 4 = Cable tie
5 = Adapter DRW212054 (installation support)
6 = Probe