Vaisala HM70 User Manual
Page 62
User's Guide ______________________________________________________________________
60 __________________________________________________________________ M210297EN-E
5. Select
Quantity
and press
SET
to choose a quantity.
6. Select
Quantity,
press
SELECT.
(One quantity can be chosen at a
time. Only active quantities can be selected. To change the
quantities, go to
MENU Display Quantities and units
).
7. Select
0.0 V
to set the value for the 0.0V output signal, press
SET
.
(If the analog output is ON, take it OFF)
Set the low value by
using arrow buttons
.
Press
+/-
button to choose the sign of the
value. Press
OK
to make the setting.
8. Select
1.0V
to set the value for the 1.0V output signal, press
SET
.
Set the high value by using arrow buttons
.
Press
+/-
button to
choose the sign of the value. Press
OK
to make the setting.
9. Select
Analog output on/off,
press
ON
to activate the analog output
and return back to the basic display.
10. A wave picture sign
appears on the upper left corner of the
basic display.
11. To deactivate the analog output function, go to
MENU
→
Functions
Analog output Analog output on/off
and press
OFF
.