Device information, Reverting to factory settings – Vaisala HM70 User Manual
Page 29
Chapter 6 __________________________________________________________________Settings
VAISALA _______________________________________________________________________ 27
Device Information
→
The basic information about the indicator and the probe is found as
follows:
1.
Open the
MENU:
press
OPEN
2.
Select
Settings
, press
.
3.
Select
Device information,
press
SHOW.
4.
The first display gives the information on the MI70 indicator.
Press
MORE
to get the information on the probe. Press
OK
and
EXIT
to return to the basic display.
Reverting to Factory Settings
You can revert to factory settings to clear all changed settings and
recorded data on the indicator. Reverting to factory settings does not
affect probe calibration.
1.
Open the
MENU:
press
OPEN.
2.
Select
Settings
, press
.
3.
Select
Factory settings,
press
REVERT.
Press
YES
to confirm the
reverting.
4.
The power turns off automatically. When switching on again,
the factory settings are reverted. After reverting to the factory
settings, you must set the language, date and time again. See
Chapter 3.
Probe type information
MI70 indicator
information