Min and max in data collecting rec read mode, Min and max in data collecting, Rec read – Vaisala HM44 User Manual
Page 28: Mode
User's Guide _______________________________________________________________________
_________________________________________________________________________________
26
RH
T
°C
%
Press HOLD while the arrow is displayed to scroll the measurement results (note
that the sequence number changes):
RH
T
°C
%
HOLD
:
RH
T
°C
%
etc.
If the button HOLD is pressed continuously, numbers change in a faster rate.
MIN and MAX in data collecting
REC READ
mode
When the data collecting
REC READ
mode has been activated, the HOLD button
brings four different modes on the display:
MIN HI
,
MAX HI
,
MIN LO
and
MAX LO
.
These modes indicate the maximum and minimum readings measured for the
quantities on the display.
HI
and
LO
tell you whether the reading observed is the
one on the first line (
HI
) or the one on the second line (
LO
). M
IN
and
MAX
indicate
whether the reading on the display is the minimum or the maximum value. In
other words, if the text is
MIN HI
it means that you are now observing the
minimum reading of the quantity on the first line.
By pressing HOLD repeatedly you can change from one display mode to another,
and by pressing MODE you can change the quantity on the first line. In all these
modes, the decimals of the second line reading are shown by pressing the button
ENTER.