WeatherHawk Inversion - Wireless - Manual (Page 21)

WeatherHawk ® 18
815 W. 1800 N. Logan, Utah 84321-1784, Email: [email protected] Copyright © 2004, 2010
Toll free in USA: 866-670-5982, International: 435-750-1802, FAX: 435-750-1749 Printed November 2010
6. Attach guy wires to anchors by first opening the turnbuckle to the widest setting. Attach turnbuckle to wedge
end of the guy cable, and then attach the other end of the turnbuckle to an anchor (see Figure 32).
7.
If using a rope ratchet to assist assembly, set to 7 feet and attach to tension clamp on cable and to anchor end. Do
this for both NE and NW anchors and top bottom guy cables.
8. Course adjustments to cable length are made by loosening screw clamp and then releasing wedge with a flat-
bladed screwdriver. This allows the cable to be adjusted through the wedge clamp (see Figure 33).
Do not connect the SOUTH cables at this time.
Retighten screw when adjustment is complete.
Open turnbuckle to widest setting Anchor
Guy Cable Wedge
Figure 32: Turnbuckle Fastened to Guy Cable and Anchor.
Figure 33: Adjusting Cable through Wedge Clamp