WeatherHawk Inversion - Wireless - Manual (Page 14)

WeatherHawk ® 11
815 W. 1800 N. Logan, Utah 84321-1784, Email: [email protected] Copyright © 2004, 2010
Toll free in USA: 866-670-5982, International: 435-750-1802, FAX: 435-750-1749 Printed November 2010
5.
Secure the coupler joint using two flat washers, two lock washers and two bolts from the hardware bag (see
Figure 14)
6. Place Mast Section 3 near the top of Mast Section 2 (see Figure 15).
7.
Remove the collars from Mast Section 3 and place them next to the mounting holes in Mast Section 2 (see
Figures 15 and 16).
Figure 15: Mast Section 2 and Mast Section 3
Figure 14: Bag
Containing Hardware
The BLACK tape around Mast Section 2 is a reference indicator (11 foot level) for wind set sensor mounts.
Figure 16: Guy Ring, Mast Section 2, and Mast Section 3