WeatherHawk Inversion - Wireless User Manual
Page 15
WeatherHawk
®
12
815 W. 1800 N. Logan, Utah 84321-1784, Email: [email protected]
Copyright © 2004, 2010
Toll free in USA: 866-670-5982, International: 435-750-1802, FAX: 435-750-1749
Printed November 2010
8.
Remove the guy ring from the bottom guy kit (pn. 21663); see Figures 16 and 17.
9.
Insert the ball end of each guy cable into its slot in the guy ring, and place the coupler of Mast Section 3 into the
guy ring (see Figure 18).
10.
Slide the coupler into Mast Section 2, and assemble the collars as shown in Figure 19.
Only one of three cables is shown.
Figure 18: Guy Cables Inserted into Guy Ring
Figure 17: Bottom Guy Kit (pn. 21663)
Figure 19: Mast Section 3 and Guy Ring/Collar Assembly