Aiwa CA-DW248 - Manual (Page 9)

ENGLISH
9
En
To prevent accidental erasure
Break off the plastic tabs on the cassette tape with a
screwdriver or other pointed tool after recording.
To record on the tape again
Cover the tab openings with adhesive tape, etc.
Tab for side A
Side A
DUBBING A TAPE
1
Press TAPE/POWER/ 6STANDBY to turn
the power off.
2
Insert a tape to be recorded on into deck 1
with the side to be recorded facing out.
3
Insert a tape to be played into deck 2 with
the side to be played facing out.
4
Press a then press w on deck 1 to enter
recording pause mode.
The power is turned on.
c is pressed simultaneously.
5
Press HI-SPEED DUBBING to select a
dubbing speed.
The HI-SPEED DUBBING indicator lights up: Dubs
at high speed.
The HI-SPEED DUBBING indicator goes off: Dubs
at normal speed.
6
Press c on deck 2.
a on deck 1 is released and recording starts.
To stop recording, press Z on deck 1 and deck 2.
The power will be automatically turned off.
NOTE
When recording near a television, noise may be
recorded. Move the unit away from the television.