Aiwa CA-DW248 - Manual (Page 8)

• Use Type I (normal) tapes only.
• Note that recording is done on only one side of the
tape.
INSERTING A TAPE
Press Z to open the cassette holder and
insert a tape with the exposed side down and
the side to be played facing out.
Push the cassette holder to close.
PLAYING A TAPE
Press c while the power is off.
The power is turned on and play of the inserted tape
begins.
The volume level is displayed during tape operation.
Z – Stops play. The power will be automatically
turned off.
a – Pauses play. To resume play, press again.
f/g – Rewinds/ fast forwards. To stop the
winding, press Z .
Continuous play
After play on deck 2 finishes, play on deck 1 will start
without interruption.
During play on deck 2, press
a then press c on
deck 1.
a on deck 1 will be released at the end of play on
deck 2.
TAPE OPERATION
C
8
ENGLISH
RECORDING FROM A CD OR THE
TUNER
1
Insert a tape to be recorded on into deck 1
with the side to be recorded facing out.
2
Get ready to record from the source.
To record from a CD, press CD and load the disc.
To record from a radio broadcast, press RADIO
and tune to a station.
3
Press w on deck 1 to start recording.
c is pressed simultaneously.
When the selected function is CD, CD play and
recording starts simultaneously.
To record only the selected tracks of a CD
1 Follow steps 1 to 4 of PROGRAMMED PLAY on
page 7 to program tracks.
2 Press w .
To stop recording, press Z on deck 1. To stop CD
play, press s STOP/MEMORY.
To pause recording, press a . To resume recording,
press again.
To erase recording, press w on deck 1 while the
power is off.
After recording, press TAPE/POWER/ 6 STANDBY to