Aiwa CA-DW248 - Manual (Page 11)

ENGLISH
11
En
To listen with the headphones
Connect headphones with a stereo mini plug to the
PHONES jack.
If an erroneous display or malfunction occurs
Make sure that none of the deck operation buttons is
pressed.
Press
s while pressing TAPE/POWER/ 6 STANDBY.
If the unit cannot be reset in the way above, disconnect
the AC cord and remove all the batteries to turn off the
display.
Leave the unit for a while and turn the power back on.
MICROPHONE MIXING
Connect a microphone with a mini plug to the
MIC jack and play a source to be mixed.
To record the microphone mixing sound, insert a tape in
deck 1 and press
w .
• During dubbing at high speed, the microphone mixing
sound is not recorded.
MIC VOL – Adjusts the microphone volume. If a
howling sound is produced, turn the volume down.
• To prevent howling, hold the microphone away from
the speakers. The use of unidirectional type
microphones is also recommended.