PortaTree Eliminator Super 2000 Versions - Manual

ELIMINATOR 2000 SUPER ---- Instruction Manual
Table of Contents – VER 4.08
• Turn On Unit: A rocker switch on the upper left-hand side turns on the ELIMINATOR.
Power unit up with:
a) AC Adaptor included with unit
b) 2 – 9 Volt Alkaline Batteries (not included) Remove back cover to install
c) 12 Volt DC cigarette lighter adaptor can also be used (Center pin positive --
5.5mm x 2.1mm plug)
• On Startup: The Portatree logo appears and each light illuminates on the “ELIMINATOR
SUPER 2000” in succession faster and faster, a light chase and then the Main Menu
appears.
• Main Menu: The display will read “Practice”, “Practice (Setup)”, “Race/Wx Logging”,
“Utilities”, “Display”, “Test Track”, and “Diagnostics”. Use the Up or Down Arrow keys to
view all of the menu items. Highlight a selection and depress “STAGE / ENTER” key to enter
into the menu item.
1.Practice:
This is where you compete for best Reaction Time.
A. “TREE” Key# 9
1. Change Full to Pro tree
2. Change Tree Speed (.400 or .500
3. Change Top Bulb Lock (Cross Talk) On / Off
4. Turn Crossover On / Off
B. “PREF” Key# 6
1. Change Dual User to Single User
2. Turn Random Dial – On / Off
3. Change Bump Down
4. Turn Shift Light – On / Off
C. “STATS” Key# 5
D. “Dial” Key# 8
E. “LOG ON” Key# 4 (Saves Individual User Settings)
F. “MAIN MENU” Key# 1
G. “DELAY BOX” Keys# 0 & 7
H. “RESET” Key# 2
I. “DATE / TIME” Key# 3
J. “STAGE / ENTER” Key
K. “STAGE / ESCAPE” Key
L. “ARROW” Keys
2. Practice (Setup)
A. Change Rollout
What’s My Rollout? Visit our Web Site: www.portatree.com , Click on “Tech Tips” choose Tech Tip# 1
B. Set Preferences
1. Perfect Tree [ON]
2. Reset – Auto / Manual
3. Preset (Preset Time to Beat for Single user Mode)
C. Set AutoStart [NO] – Allows you to change AutoStart settings
D. Set Shift Points [NO] – Allows you to change Shift Point settings
3. Race / Wx Logging
If you have a Snap-In weather unit you can Log Weather here.