Outback Power Systems VFX Series International Installation Manual - Manual (Page 42)

40
TWO YEAR LIMITED WARRANTY INFORMATION
FX Series Inverter/Charger Products
OutBack Power Systems, Inc. (“OutBack”) provides a two year (2) limited warranty (“Warranty”) against defects
in materials and workmanship for its FX/VFX Series Inverter/Charger products (“Product(s)”) if installed in fi xed
location applications.
The term of this Warranty begins on the Product(s) date of manufacture or the initial purchase date as indicated
on the warranty registration card submitted to OutBack, whichever is greater. This Warranty applies to the
original OutBack Product(s) purchaser, and is transferable only if the Product(s) remains installed in the original
use location. The warranty does not apply to any Product(s) or Product(s) part that has been modifi ed or
damaged by the following:
• Installation or Removal;
• Alteration or Disassembly;
• Normal Wear and Tear;
• Accident or Abuse;
• Corrosion;
• Lightning;
• Repair or service provided by an unauthorized repair facility;
• Operation contrary to manufacturer product instructions;
• Fire, Floods or Acts of God;
• Shipping or Transportation;
• Incidental or consequential damage caused by other components of the power system;
• Any product whose serial number has been altered, defaced or removed; or
• Any other event not foreseeable by OutBack.
OutBack’s liability for any defective Product(s), or any Product(s) part, shall be limited to the repair or replacement
of the Product(s), at OutBack’s discretion. OutBack does not warrant or guarantee workmanship performed
by any person or fi rm installing its Product(s). This Warranty does not cover the costs of installation, removal,
shipping (except as described below), or reinstallation of Product(s).
Revision.2008-04-01