4 dhcp setting – Monoprice PID 8743 Wireless N ADSL2 Modem and Router 802 11N WPS Function 2T2R 300Mbps User Manual
Page 67

ADSL2/2+ Router
- 67 -
requirement of the practical network environment.
To enter the screen below, click “Advanced Setup”--“LAN”.
IP Address: It is the Router’s LAN IP address. The default IP
address is 192.168.1.1.
Subnet Mask: It is the Router’s LAN subnet mask. You can
modify it according to your needs.
Enable IGMP Snooping: Check/uncheck to enable/disable the
IGMP Snooping.
Note:
If you have changed the LAN IP address, then you must re-
configure your PC’s IP address to log on to the router’s Web-
based management interface, and the default gateway of all
computers that connect to the router’s LAN ports have to be set
to the new IP address for normal Internet access.
4.2.4 DHCP setting
DHCP Server
This router enables DHCP server function by default. DHCP refers to
Dynamic Host Control Protocol. With an internal DHCP server, the