Monoprice PID 8743 Wireless N ADSL2 Modem and Router 802 11N WPS Function 2T2R 300Mbps - Manual (Page 109)

ADSL2/2+ Router
- 109 -
base station will establish bridge with the AP in the meantime. Namely,
you can establish communication with wireless base station through a
wireless network adapter) as shown in the figure below:
In the above figure, two MW300Ds are used to enlarge wireless signal
coverage. MW300D-2 is configured as a wireless access point to
establish a wireless bridge with W300D-1. In the meantime, the AP
function reserved in MW300D-2 enables PC3 and PC4 to
communicate with MW300D-2 and access Internet through wireless
network adapters.
2. Wireless bridge (Here in this mode, wireless is used as pure bridge
only with no more AP function to connect and communicate with
remote devices. Namely, your PC can only be connected to the device
via wired media instead of communicating with the device through
wireless network adapter.) See the figure below: