Asante Technologies 5324 - Manual (Page 98)

Advanced Management
Page 7-6
Displaying an RMON History Control Group Entry
To display an RMON History Control Group entry:
▲
Important: There must be at least one History
Control Group entry in the system in order to
display information for an entry. To add a His-
tory Control Group entry, see “Adding an RMON
History Control Group Entry” on page 7-4.
1 Type p from the RMON History Group menu.
2 Enter the number of the RMON History
Group entry to be displayed.
3 Press return.
A screen similar to Figure 7-4 appears.
Figure 7-4 Display RMON History Control Group entry
Interface
The number of the port for which statistics are displayed.
Requested Buckets
The requested number of discrete time intervals over
which data is to be saved. This number can be between 1
and 10.
Granted Buckets
The number of discrete sampling intervals over which data
shall be saved in the part of the media-specific table
associated with this entry.