Asante Technologies 5324 - Manual (Page 80)

Console Management
Page 5-32
Set Telnet Idle Time Out
This option sets the Telnet idle time-out period.
If a Telnet connection to the IntraSwitch remains idle for the
number of specified time-out minutes, the remote Telnet
connection to the switch is automatically disabled.
To set the Telnet Idle Time Out period:
1 Type t from the Configuration Menu.
The following two lines appear at the bottom of
the screen:
Figure 5-11 Set TelNet Idle Time Out command line
The current idle time is displayed in minutes.
2 Enter the number of minutes for the time-out
period at the prompt.
∆
Note : The default and recommended time-
out period is 20 minutes.
To exit this option without making any
changes to the current idle time-out period,
press
ctrl-c.
3 Press return.