Configuration/ management – Asante Technologies 5324 User Manual
Page 19

Introduction
Page 1-4
Configuration/
Management
The IntraSwitch 5324 can be managed through standard out-of-
band sessions through the Console port, via in-band Telnet 
sessions, or via any SNMP-based management software program 
(such as IntraSpection™). 
Console/Telnet Management
The SNMP (Simple Network Management Protocol) is used to 
manage the IntraSwitch 5324. The SNMP agent supports 
database objects that are defined in the following Management 
Information Bases (MIBs):
❏
MIB II (RFC 1213)
❏
Bridge MIB (RFC 1493)
❏
RMON, 4 groups (RFC 1757)
The SNMP agent can be accessed via out-of-band Console 
connections or through in-band Telnet sessions. See Chapter 4, 
“Setting Up For Management,” for information on connecting 
via one of these two methods.
See Appendix B, “Supported MIBs” for more information on the 
MIBs supported by the IntraSwitch.
SNMP-Based Management
IntraSpection Web-based network management software, along 
with any other SNMP-based network management application, 
can be used to manage the IntraSwitch 5324. See Chapter 9, 
“SNMP-based Management” for more information.
Web Browser Management
In a future release of the switch’s software, the IntraSwitch will 
be capable of management via any standard World Wide Web 
browser. 
Check Asanté’s World Wide Web site (http://www.asante.com) 
for the latest information on the IntraSwitch and its software 
releases.
