Configure tcp/ip parameters – Asante Technologies 5324 User Manual
Page 59

Configure TCP/IP Parameters
Page 5-11
Configure TCP/IP Parameters
This menu displays and allows you to change the information
needed to access the IntraSwitch over the network (in-band
management).
To access the TCP/IP Parameter Menu, type
i from the
Configuration Menu. The following menu appears:
Figure 5-4
TCP/IP Parameter Menu
∆
Note: By default, each parameter is set to 0.0.0.0.
Current Settings
Table 5-4 explains each setting on the TCP/IP Parameter
Menu.
For information on using the menu, see “Changing TCP/IP
Information” on page 5-12.
Table 5-4 TCP/IP Parameter Settings
Setting
Description
Switch IP Address
The IntraSwitch’s IP (Internet Protocol)
address.
Switch Subnet Mask
The address of the subnet mask on which the
IntraSwitch is located.
Switch Default
Gateway
The address of the IntraSwitch’s default
gateway.
Current Settings
- IC38480 (2 pages)
- 2072 (46 pages)
- IntraCore IC39240 (3 pages)
- FRIENDLYNET FS4116R (6 pages)
- 3624/48 (145 pages)
- FS5016 (2 pages)
- IntraCore IC35160T (5 pages)
- FM2008/2009 (86 pages)
- INTRACORE IC35516-T (22 pages)
- 5212 (146 pages)
- INTRACORE 3724PWR (154 pages)
- FS4008P (10 pages)
- IntraCore IC3624 (2 pages)
- FH100TX16 (19 pages)
- Asante FriendlyNET FS4124R (2 pages)
- IntraCore IC3624PWR (2 pages)
- IntraCore (1 page)
- 8000 (168 pages)
- FH208B (36 pages)
- 3500 (36 pages)
- IntraCore IC3648 (2 pages)
- L2 (1 page)
- FX4000 (16 pages)
- GX4-800GBIC (8 pages)
- 3500 Series (85 pages)
- 65120 (47 pages)
- FS4004DS (44 pages)
- 6200 (188 pages)
- Asante FriendlyNET FS4116R (2 pages)
- IC35516G (5 pages)
- IntraCore 3548-2GT Series (4 pages)
- 100TX (74 pages)
- 5308F (152 pages)
- GX5-2400W (41 pages)
- FM2008/9 (4 pages)
- GX4 (10 pages)
- 3524 Series (82 pages)
- 6000 Series (102 pages)
- 7000 (39 pages)
- FS4016P (12 pages)
- IC3624PWR (87 pages)
- 39240 (148 pages)
- 35160 (79 pages)
- FM2017 (28 pages)