Asante Technologies 5324 - Manual (Page 18)

IntraSwitch Components
Page 1-3
IntraSwitch
Components
10/100TX Port
The auto-negotiating 10/100TX port allows for the connection
of a 10Base-T or a 100Base-T (Fast Ethernet) device. See “10/
100TX Port” on page 2-7 for more information.
10Base-T Ports
The 24 fixed 10Base-T ports allow for the connection of 10Base-
T Ethernet devices. See “10Base-T Ports” on page 2-7 for more
information.
Management Connections
The Console port can be used for out-of-band management of
the IntraSwitch. See “Out-of-Band Management” on page 4-4 for
information.
MII Expansion Slots
The two Media Independent Interface (MII) expansion slots
allow for the addition of various access modules, including: 10/
100TX, 100Base-FX, or 10Base-FL. See “MII Ports” on page 2-8
for more information.
Redundant Power Supply Connector
The redundant power connection can be used to connect to an
Asanté external RPSU 6000 redundant power supply (sold
separately). The RPSU 6000 provides the IntraSwitch with
power in the event that the switch’s main power connection
fails. Refer to the RPSU 6000’s Installation Guide for more
information or to Appendix C in this manual for part number
information.
Power Switch
The power switch turns the IntraSwitch on or off. See
“Connecting Power” on page 2-4 for instructions on powering
on the IntraSwitch.
Power Supply Connector
The 5-volt power supply connector provides the IntraSwitch’s
power connection. See Appendix C, “Technical Specifications”
for more information.