Asante Technologies 5324 - Manual (Page 108)

Advanced Management
Page 7-16
Adding an RMON Event Group Entry
This option allows you to add an Event Group entry.
To add an Event Group Entry:
1 Type a from the RMON Event Group Menu.
Command prompts, similar to those shown in
Figure 7-11, appear one at a time on the screen.
Figure 7-11 Add RMON Event Group entry
2 Enter the information requested for each
prompt, following the guidelines below.
Event Description
Enter a description of the event.
Event Type
Enter the type of event to occur upon a threshold violation.
Options are:
❏ none — no action is taken.
❏ log — records the alarm in the RMON
Event Group Entry Log.
❏ trap — sends a trap to the SNMP trap receiver
(specified in the SNMP parameters menu).
❏ log and trap — records the alarm and
sends a trap to the SNMP trap receiver.
Command Prompts